VDT Foam Pigs Low Density
VDT Foam Pigs Low Density
Description:
Light density bare Foam Pigs (density 18-38 kg/m3) are used to remove fine debris or fluids from ducts in. These are generally pushed through a pipe using air or water pressure and can easily pass through short radius bends. When ordering, state the inside diameter of the duct, pigs are supplied larger in diameter to give adequate squeeze. These are coated with polyester and Eva coating at the rear in order to develop the required pressure differential. Also, it can be reinforced with elastomer coating at the rear.
Feature:
“Each Foam pig is made of VDT’s foam for cleaning the newly commissioned pipeline. The Density of LD pig is 18 to 38 kg/cm3.
The VDT Foam Pigs are packaged in plastic bags which extend the shelf-life in high-temperature, high humidity regions.”
Related Products:
MFL
Description:Magnetic flux leakage (MFL) is an electromagnetic non-destructive testing technique used to detect corrosion and pitting.Feature:MFL uses a powerful magnet to magnetize the conductive material under test (usually steel). Where there are defects — corrosion...
EGP
Description:EGP tool is used to check the internal geometry of the pipeline.Feature:"Pipeline features and deformations of pipeline surface detectable by electronic geometry pig: Pipeline location features • bends (turns) • bend radius • turn angle Cross section...
Cathodic Protection
Description:Cathodic protection is a common method used in various industries that uses a low electrical current to prevent corrosion of metal structures such as pipelines, tanks, steel-pier piles and offshore oil platforms.Feature:Cathodic protection is the most...